TruSeal Diverter 3-Way Valve 2 in. made by Waterway 600-7100-CPVC

Waterway positive
seal diverter
valves have been
designed for the
most demanding
applications.
The
TruSeal Valve is
loaded with features
and there is not a
longer warranty in
the industry.

• Diverter valve seal is Teflon laminated silicone
• Unique manufacturing process called TruSeal results in a seal
  that never needs lubrication
• TruSeal Valves have deeper sockets than other valves providing
  better glue joint bonding
• The exclusive Click & Lock handle has 72 locking
  positions / points for virtually any setting desired
• Exclusive Flow Labels gives your plumbing a
  professional look and more value
• Universal shaft spline pattern adapts to most actuators
• Waterway manufacturers all TruSeal
  Diverter Valves in the USA
• Valve Seal Lifetime Warranty

TRUSEAL TRIGGER LOCK HANDLE USE:

• NOTE: Valve handle must not be removed during use unless a valve actuator is
  installed. To turn handle squeeze trigger and move to desired position.

• OFF INDICATOR:

  • Off area on indicator represents the exact position of the
    internal valve diverter seal.

  HANDLE STOPS

  • Protruding stoppers located on valve cover will stop diverter
    in complete port shut-off position.

  TRUSEAL FLOW INDICATOR TAGS:

  • There are flow indicator tags that can be
    attached for your convenience, to ensure flow to the designated port. Be sure
    theINLETtag is positioned on the valve cover over the desired incoming flow
    port. NOTE: For some installations it may be desirable to permanently glue the
    flow indicator tags in place. When doing this, remove the lid/valve assembly
    from the valve body prior to gluing flow indictor tags. When replacing lid/
    valve assembly hand-tighten screws evenly to ensure correct sealing. DO NOT
    over-tighten.

  Size:

  • ID…………….2 in. Slip(Socket)
  • OD…………..2.5 in. Spigot