Ultra-Flow Pump
This unit, sometimes referred to as the Hair and Lint Pot is the unit in front of the volute. Inside the chamber is the basket which must
be kept clean of leaves and debris at all times. View basket through the See Through Lid to inspect for leaves and debris.
Regardless of the length of time between filter cleaning, it is most important to visually inspect the hair and lint pot basket at least once
a week. A dirty basket will reduce the efficiency of the filter and heater and also put an abnormal stress on the pump motor which
would result in a costly repair bill.
|
1 |
357143
V38-131 |
Seal plate |
|
2 |
071734S |
Shaft Seal PS-1000 |
|
3 |
98220500 |
Nut, brass, 3/8, 16 hex |
|
4 |
98220600 |
Washer Split Lock 3/8″ 18-8 s/s- |
|
5 |
39005600
V38-122 |
Impeller 1/2 HP |
|
39005000
V38-123 |
Impeller 3/4 HP |
|
39005100
V38-124 |
Impeller 1 HP |
|
39005200
V38-126 |
Impeller 1 1/2 HP |
|
39005300
V38-127 |
Impeller 2 HP |
|
39005400
V38-128 |
Impeller 3 HP |
|
6 |
39009900 |
Screw, impeller lock, left-hand thrd. |
|
7 |
39010000 |
O-ring for impeller lock |
|
8 |
39005500
V38-132 |
Diffuser, 1/2 to 1-1/2 HP |
|
39015500
V38-133 |
Diffuser, 2 and 3 HP |
|
9 |
39006900
V38-134 |
Wear ring |
|
10 |
39006600 |
Gasket, diffuser |
|
11 |
39006000 |
O-ring, volute |
|
12 |
357140
V38-130 |
Volute, 2 in. |
|
13 |
39006200
V38-163 |
Clamp assembly, volute |
|
14 |
39302700
V38-118 |
Tie Rod Knob, clamp |
|
15 |
357139 |
Base, almond |
|
16 |
072184 |
Washer, flat 3/8″ ID x 7/8″ OD .05 Thk 18-8 s/s – |
|
17 |
98219800 |
Bolt 5/16-18 x 1 in., SS |
|
18 |
39501200 |
Gasket, pot to volute |
|
19 |
357138 |
Pot, 1-1/2 in. thrd., with wear ring, almond |
|
20 |
070979 |
Handle stud bolt SS, 1/4-20 x 1-3/4 in. |
|
21 |
39303500
V38-185 |
Basket |
|
22 |
39300300
V38-161 |
Lid O-ring
(Used on pumps manufactured before 11-94. ) |
|
39300600
V38-164 |
Lid O-ring
(Used on pumps manufactured after 11-94. ) |
|
23 |
39301600
V38-160 |
Lid
(Used on pumps manufactured before 11-94. )
|
|
39301700
V38-162 |
Lid
(Used on pumps manufactured after 11-94. ) |
|
24 |
39303000
V38-166 |
Lid Clamp |
|
25 |
357136 |
Plug 1/4 in. with O-ring, almond |
|
26 |
39007200 |
Ring, reinforcing, for ports 2 in. |
|
39204600 |
Ring, reinforcing, for ports 1-1/2 in. |
|
27 |
B846 |
Motor 0.5 HP |
|
B847 |
Motor 0.75 HP |
|
B848 |
Motor 1.0 HP |
|
B849 |
Motor 1.5 HP |
|
B748 |
Motor 2.0 HP |
|