Pentair Pool Cleaner In-Line Builder Valve Kit K12142B
In-Line Builder Valve Kit Pool Cleaner made by Pentair K12142B Vacuum Line Valve Kit We strongly recommend the use of the automatic regulator valve for maximum safety and performance. The valve automatically adjusts to changes in the amount of water flow to provide Kreepy Krauly with the power necessaiy to ensure proper cleaning performance. 1. Turn the pump off A 2. Close the main drain and all suction lines, except the line to which Kreepy Krauly will be connected. 3. Thread the snap-lock wall fitting into the end of the dedicated vacuum line 4. Install the automatic regulator valve (encased in the strainer guard) into the snap- lock wall fitting. See The Figure. Next, install the hose adapter into the end of the automatic regulator valve. See The Figure Below 5. Place Kreepy Krauly into the swimming pool and allow it to sink to the swimming pool floor. Continue to’ feed the hose vertically down into the swimming pool until it is completely filled with water and purged of all air. 6. Remove the hose protector from the female/female hose section and connect it to the end of the hose adapter installed into the automatic regulator valve. See The Figure
…read more