Pentair Automatic Pool Cleaner Wire Diverter K121620
Wire Diverter Automatic Pool Cleaner made by Pentair K121620 The wire diverter kit is used on the following automatic swimming pool cleaners: E-Z Vac Kreepy Kadet Kreepy Krauly etc. The Diverter wire is pre-bent for installation into 1 1/4 inch to 1 1/2 inch return line openings. Note the 45 degree bend in figures 1 and 2. To customize the wire diverter to fit swimming pool returns smaller than 1 1/4 inches: l. With a pair if pliers, bend the wire as shown in figure 3. 2. Bend the wire tip ( 1/2 inch from its end) upward 45 degrees as shown in figure 4. To install Diverter NOTE: IF NO EYEBALL FITTING IS PRESENT SKIP TO STEP NUMBER 3 (FLUSH CUT PIPE INSTALLATION). 1. Remove the threaded ring and eyeball. Leave the threaded bushing in place in the return line as shown in figure 5. 2. Insert the diverter wire fully into the return line, making sure to lift the diverter cap to rest onto the top of the threaded busing as shown in figure 6. With the pliers, tap the end of the diverter cap to seat the wire until the diverter feels secure. You may also twist
…read more