Bromine Test Strips Spa Hot Tub made by Leisure Time 45005

leisure Time Spa & Hot Tub Test Strips provide the fastest and easiest way to
test spa or swimming pool water.
The important tips below will aissure proper use of the strips and
accurate results Simply swirle strip three times under the water surface an remove
it with the pods facing up. The strip is now ready for comparison to the color chart on
the side of the bottle. Test the water 3 to 5 times a week after the initial start up and
then twice a week alter the results have remained at the ideal level. Test spa water
before each use to assure appropriate Bromine levels are maintained. Testing and
treating spa and swimming pool water properly can avoid unnecessary chemical treatments and
indicate when treatments are required to protect the bather and the spa or swimming pool.

IMPORTANT TIPS:

• Store strips indoors and away from extreme heat or sunlight.
• To open push tab up witlh thumb and shake out a strip. Avoid wet fingers
  inside the vial promptly after removing a strip.
• To close, press the center of the cap down firmly until it snaps.
• In spas, turn off jiets and immerse the strip to 6" below the water surlace and swirl three times to measure results.
• In swimming pools, immerse the strip to elbow depth to test a representative sample.