.DynaGlas Pump Sta-Rite Diagram
January 24, 2013 in Sta-Rite Dyna-Glass Pump by PoolSpaRemote
Sta-Rite DynaGlas Pump
FAILURE TO PUMP
REDUCED CAPACITY OR
DISCHARGE PRESSURE
Suction leaks/lost prime:
- Pump must be primed; make sure that pump volute
and trap are full of water. - Make sure there are no leaks in suction piping.
- Make sure suction pipe inlet is well below the water
level to prevent pump from sucking air. - If suction trap gasket is defective, replace it.
- Make sure pump is not trying to lift water more than
10′(3m). - Make sure suction pipe is at least 2" (51mm) in
diameter.
Clogged pipe/trap/impeller, worn impeller:
- Make sure suction trap is not clogged; if it is, clean
trap and strainer. - Make sure impeller is not clogged
- Impeller and diffuser may be worn. If so, order
replacement parts from Repair Parts List