Air Switch 21AMP SPDT TRA111A Latching Radial Spout made by Allied Innovations 3-20-0027 Mounting: 8/32" Screw

SpaLink RS Flush Mount Mud Box made by Jandy 7940 The mud box is for use with the new style SpaLink that is provided with a matching snap-on frame. The mud box will not work with the earlier version of SpaLink. The SpaLink must be installed above the flood line/spillover (highest point that water can reach if the vessel is flooded). The mud box is for use in either tile or concrete installations. For deck or wall installations, the mud box is not required. See the SpaLink instructions for installation in decking. For more information click here.

Spa Heater 240V 15in. x 2in. 5.5 KW made by Balboa 50096 5.5kw 240V with pressure switch 2 in. x 15 in.

Mini SPDT 30A 240VAC Power Relay 60-590-1055 Miniature Power Relay by Hydro-Quip 30 amp rating available in SPST or SPDT and various coil voltages. A powerful relay in a small package! Dimensions are 1-7/8″ x 1-1/8″ x 1″ Action Coil Amps SPDT 240 VAC 30am Hydro-Quip 35-0003 610373 AZ2280-1C-240A 22149

Air Button #4 Lite Touch White made by Allied Innovations 950401-000 Requires 1-1/4" mounting hole

Fiberglass Pool SpaSuction Main Drain made by CMP 25215-000-000 Face Diameter ……………………….6 in. Length…………………………………..2.5 in. Type…………………………………….Suction, Main Drain Style……………………………………..2 in. Slip Color…………………………………….White Material…………………………………Plastic   175 GPM Fiberglass Pool suction VGB-2008 Compliant. WARNING: When using two or more suction fittings on a common suction line, suctions must be separated by a minimum of 3 ft or they must be located on two different planes (i.e., one on floor and one on the wall). WARNING: Do NOT locate suction outlets on seating areas or on backrests for such seating areas. The maximum flow rating for this suction fitting is 175 GPM. This suction fitting is designed for installation on side wall or floor of portable spas, hot tubs, or swimming pools in conjunction with at least one other suction fitting per pump. DO NOT adapt suction fitting to any pipe size smaller than ASTM 2" SCH 40 PVC. Suction fitting and fasteners should be observed for damage or tampering before each use. Missing, broken, or cracked suction fittings shall be replaced before use. Loose suction fittings shall be reattached or replaced before use. Mount suction fittings on the walls, in the foot wells of portable spas,,hot tubs, or swimming pools. Do not
…read more