Hayward NorthStar Pump Shaft Seal PS-3890 made by U.S. Seal INSTALLATION INSTRUCTIONS FOR REPLACEMENT SEALS Disassemble pump cavity to expose defective seal. Removal of old seal and installation of new seal requires careful operations and precautions. CAUTION: Lapped and polished faces of new seal are easily scratched and damaged. PROTECT FROM DAMAGE, DIRT and FINGER PRINTS. Carefully remove old seal head and seat taking care not to scratch shalt or seat counterbore. NOTE HOW OLD SEAL IS ASSEIVIBLED. BE SURE REPLACE MENT SEAL IS INSTALLED IN IDENTICAL MANNER. Clean shaft and counterbore surfaces using fine emery cloth or equivalent Remove rust, burrs, and wipe clean. Shaft, seat counterbore and rubber members of seal head and seat should be lubricated with a lubricant compatible with the seal elastomers. U.S SEALUBE is recommended and available from US Seal. U.S. SEALUBE is a WATER BASED formula specifically designed to lubricate rubber making the installation of mechanical seals fast and easy. It provides a high degree of lubricity to all rubber components. It maintains its wetness for a short period of time allowing for easy installation of a mechanical seal. NEVER use PTFE or SILICONE based lubricants. Check seal surfaces to be sure they
…read more

Pool Motor Ball Bearing 17MM Double Sealed made by US Seal RBL-6203-LL OD……..1-17/32″ ID………21/32″

Impeller for Purex AH Series 1.0 HP Pump 071033 V20-110

Pump Leaf Trap 6 in. 1.5 in. X 1.5 in. made by Waterway 310-5400 Leaf Trap – 1 ½" Union x 1 ½" FPT

Power-Flo Pump Housing Cover made by Hayward SPX1500B

Pool Motor Ball Bearing 20MM Double Sealed made by US Seal RBL-6304-LL OD……..2-1/16" ID………25/32"

Impeller for Purex AH Series 1.5HP Pump 071034 V20-115

Pump Leaf Trap 6 in. 2 in. X 2 in. made by Waterway 310-6600 Leaf Trap –2" Union x 2"FPT