Pressure Hose(GoodYear) 2 ft. for Polaris Booster Pump V32-606 B05

Polaris Booster Pump The Polaris Booster Pump supplies pressure water to the Polaris swimming pool cleaner to optimize cleaner efficiency. The Pumpis not self-priming and should only be used when the swimming pool filtration pump is on. Running the booster pump without filtration pump will damage the booster pump. Improper operation of the booster pump will oid the warranty. 1 P5 Volute (Includes Drain Plug) 2 P15 Impeller 3 P55 Seal 4 P95 Bracket O-Ring 5 P10 Bracket 6 P35 Bolt, Stainless, Bracket to Motor   7 P40 O-Ring for Shaft   8 B121 Polaris Booster Pump Motor 0.75 HP P61 Motor, ¾ HP, Threaded Shaft, 60 Hz 9 P25 Bolt/Nut, Stainless for Volute to Bracket   10 P80 Rubber Strip, Motor/Bracket   11 P70 Pump Stand with Feet, Strip 12 P75 Rubber Feet   13 P65 Bolt, SS, Stand to Bracket and Motor   14 P20 1⁄8" NPTM Plug, Plastic   15 P17 Installation Kit, Softube Quick Connects 16 P19 Pump Hose, 6 ft., Flexible Reinforced 17 P133 Softube Quick Connect 18 P21 Pump Quick Connect Retainer   • V40-401 Shaft Screw • V40-116 Shaft • B05 V32-606 Pressure Hose 2 ft • HPF8C Booster Pump Polaris Hose to
…read more

3/4 in. male hose to 3/4 in. male or 1/2 in. female pipe Adapter for Polaris Booster Pump HPF8C

Volute for Polaris Booster Pump P5 Includes drain plug.

Shaft for Polaris Booster Pump V40-116

Impeller for Polaris Booster Pump P15

Shaft 1/4"-20 x 5/16" Screw for Polaris Booster Pump V40-401

Shaft Seal for Polaris Booster Pump P55 PS-1000 INSTALLATION INSTRUCTIONS FOR REPLACEMENT SEALS Disassemble pump cavity to expose defective seal. Removal of old seal and installation of new seal requires careful operations and precautions. CAUTION: Lapped and polished faces of new seal are easily scratched and damaged. PROTECT FROM DAMAGE, DIRT and FINGER PRINTS. Carefully remove old seal head and seat taking care not to scratch shalt or seat counterbore. NOTE HOW OLD SEAL IS ASSEIVIBLED. BE SURE REPLACE MENT SEAL IS INSTALLED IN IDENTICAL MANNER. Clean shaft and counterbore surfaces using fine emery cloth or equivalent Remove rust, burrs, and wipe clean. Shaft, seat counterbore and rubber members of seal head and seat should be lubricated with a lubricant compatible with the seal elastomers. U.S SEALUBE is recommended and available from US Seal. U.S. SEALUBE is a WATER BASED formula specifically designed to lubricate rubber making the installation of mechanical seals fast and easy. It provides a high degree of lubricity to all rubber components. It maintains its wetness for a short period of time allowing for easy installation of a mechanical seal. NEVER use PTFE or SILICONE based lubricants. Check seal surfaces to be sure they are free
…read more

A.O. Smith Centurion 1081 Standard C-Frame Keyed Motor 3/4 HP B121 HP 3/4 RPM 3600 Volts 230/115 Frame 56C Phase 1 Encl Open To use the A.O. Smith Centurion 1081 B121 as a replacement motor for a Polaris Booster Pump You have to use with it Polaris Booster Pump Shaft Screws (3) Polaris Booster Pump Shaft Extention

Bracket O-Ring for Polaris Booster Pump P95