Jandy JHP PHP Pump Body Gasket Replacement Kit R0555900 Used on the following models: JHP 0.75, 1.0, 1.5, 1.5-2, 2.0, 2.0-2, 3.0 JHPU 1.0, 1.5, 2.0, 2.0-2, 2.5 PHP 0.75, 1.0, 1.5, 2.0, 3.0 PHPU 1.0, 1.5, 2.0, 2.0-2, 2.5, 2.5-2

JHP PHP Pump Drain Plugs made by Jandy R0559500

Jandy Pump Shaft Seal R0338200 made by U.S. Seal PS-601 INSTALLATION INSTRUCTIONS FOR REPLACEMENT SEALS Disassemble pump cavity to expose defective seal. Removal of old seal and installation of new seal requires careful operations and precautions. CAUTION: Lapped and polished faces of new seal are easily scratched and damaged. PROTECT FROM DAMAGE, DIRT and FINGER PRINTS. Carefully remove old seal head and seat taking care not to scratch shalt or seat counterbore. NOTE HOW OLD SEAL IS ASSEIVIBLED. BE SURE REPLACE MENT SEAL IS INSTALLED IN IDENTICAL MANNER. Clean shaft and counterbore surfaces using fine emery cloth or equivalent Remove rust, burrs, and wipe clean. Shaft, seat counterbore and rubber members of seal head and seat should be lubricated with a lubricant compatible with the seal elastomers. U.S SEALUBE is recommended and available from US Seal. U.S. SEALUBE is a WATER BASED formula specifically designed to lubricate rubber making the installation of mechanical seals fast and easy. It provides a high degree of lubricity to all rubber components. It maintains its wetness for a short period of time allowing for easy installation of a mechanical seal. NEVER use PTFE or SILICONE based lubricants. Check seal surfaces to be sure they
…read more

Jhp JHPU Pump Coupling Nut 2 – 2.5 in. made by Jandy R0556300 Used on the following pumps: JHP JHPU

Pump Shaft Seal Jandy made by U.S. Seal PS-3868 INSTALLATION INSTRUCTIONS FOR REPLACEMENT SEALS Disassemble pump cavity to expose defective seal. Removal of old seal and installation of new seal requires careful operations and precautions. CAUTION: Lapped and polished faces of new seal are easily scratched and damaged. PROTECT FROM DAMAGE, DIRT and FINGER PRINTS. Carefully remove old seal head and seat taking care not to scratch shalt or seat counterbore. NOTE HOW OLD SEAL IS ASSEIVIBLED. BE SURE REPLACE MENT SEAL IS INSTALLED IN IDENTICAL MANNER. Clean shaft and counterbore surfaces using fine emery cloth or equivalent Remove rust, burrs, and wipe clean. Shaft, seat counterbore and rubber members of seal head and seat should be lubricated with a lubricant compatible with the seal elastomers. U.S SEALUBE is recommended and available from US Seal. U.S. SEALUBE is a WATER BASED formula specifically designed to lubricate rubber making the installation of mechanical seals fast and easy. It provides a high degree of lubricity to all rubber components. It maintains its wetness for a short period of time allowing for easy installation of a mechanical seal. NEVER use PTFE or SILICONE based lubricants. Check seal surfaces to be sure they are
…read more

SHP PHP MHP WFTR JEP SWF Backplate Replacement Kit made by Jandy R0445200 Used on the following models: SHPF, SHPM → All PHPF, PHPM → All MHPM, JEP → All WFTR → All

Pump Lid SHPF SHPM JEP with Locking Ring made by Jandy R0445800 Used on the following models: SHPF → All SHPM → All JEP → All SWDF → All

Pump Lid PHPF PHPM MHPM with Locking Ring made by Jandy R0448800 Used on the following models: PHPF PHPM MHPM

Pool Pump Drain Plug made by Jandy R0446000 Used on the following Jandy pumps: MHP, PHP, JEP SHP, WFTR SWF, LXI Legacy

PHP WFTR MHPM JEP SHP Pump Diffuser made by Jandy R0445400 The diffuser is used on the following pumps: PlusHP PHPF PHPM WaterFeature WFTR MaxHP MHPM ePump JEP Stealth SHPF SHPM