Basket for Hayward Max-Flo Pump SPX1250RA Used on models 1994 and prior.

Impeller for 1 1/2 HP Hayward Max-Flo Pump SPX2610C

Hand Knob Kit for SP2800X Hayward Max-Flo Pump SPX1600PN

Impeller for 2 HP Hayward Max-Flo Pump SPX2615C

Housing Gasket Assembly for Hayward Max-Flo Pump SPX1600T

Three Pointed Hand Knob for 1994 and prior (SP1800X ) Hayward Max-Flo Pump SPX1250Z4

Diffuser Gasket for Hayward Max-Flo Pump SPX1600R

A.O.Smith Standard C-Frame Threaded Shaft 1.5 HP Motor ST1152 HP 1-1/2 RPM 3450 Volts 115/230 Frame 56J Phase 1 Encl Open

Seal PS-201 Assembly for Hayward Max-Flo Pump SPX1600Z2 INSTALLATION INSTRUCTIONS FOR REPLACEMENT SEALS Disassemble pump cavity to expose defective seal. Removal of old seal and installation of new seal requires careful operations and precautions. CAUTION: Lapped and polished faces of new seal are easily scratched and damaged. PROTECT FROM DAMAGE, DIRT and FINGER PRINTS. Carefully remove old seal head and seat taking care not to scratch shalt or seat counterbore. NOTE HOW OLD SEAL IS ASSEIVIBLED. BE SURE REPLACE MENT SEAL IS INSTALLED IN IDENTICAL MANNER. Clean shaft and counterbore surfaces using fine emery cloth or equivalent Remove rust, burrs, and wipe clean. Shaft, seat counterbore and rubber members of seal head and seat should be lubricated with a lubricant compatible with the seal elastomers. U.S SEALUBE is recommended and available from US Seal. U.S. SEALUBE is a WATER BASED formula specifically designed to lubricate rubber making the installation of mechanical seals fast and easy. It provides a high degree of lubricity to all rubber components. It maintains its wetness for a short period of time allowing for easy installation of a mechanical seal. NEVER use PTFE or SILICONE based lubricants. Check seal surfaces to be sure they are free
…read more

A.O.Smith Standard C-Frame Threaded Shaft 1.0 HP Motor ST1102 HP 1 RPM 3450 Volts 115/230 Frame 56J Phase 1 Encl Open