Hayward Vari-Flo Valve SP0714T OPTIONAL: A pipe tap boss is provided for use of a pressure gauge. PLUMBING: Piping stops are provided. IMPORTANT: Do not overtighten pipe fittings. Proper fitting make-up is hand tight plus one to 1-1/2 turns maximum. Always use Teflon pipe tape or Permatex No. 2 for connections to provide a good,living? seal. Add extra sealant if male pipe fitting is undersized. WINTERIZING: Drain and winterize filter and pump per manufacturers instructions. To drain water from Vari-Flo?depress and rotate valve handle and place handle pointer on raised portion of index hubs at anyWinterposition. SERVICING VALVE: If it becomes necessary to service or gain access to the key or valve seat gasket: a. Set handle in Winter position. b. Remove cover screws. c. Lift cover and key assembly out. RE-ASSEMBLY VALVE: a. Wipe debris from cover O-ring. b. Set handle in Winter position. Align notch on cover with tab on body. Press down to seat assembly. c. Secure assembly to body with cover screws. Start screw thread in existing thread in body. Tighten cover screws evenly and alternately. Do not overtighten. FUNCTIONS OF VALVE POSITIONS VALVE SETTING FLOW DIRECTION THROUGH VALVE FILTER PUMP – TOP – THROUGH FILTER
…read more

Tank For S220T Hayward Pro Series Sand Filter SX220AA1 Filter Tank with Skirt, Drain, Lateral Assembly S220T.

Pressure Gauge For Hayward Pro Series Sand Filter ECX270861 Universal.

Tank For S244T Hayward Pro Series Sand Filter SX244AA1 Filter Tank with Skirt, Drain, Lateral Assembly S244T.

Valve/Tank O-Ring For Hayward Pro Series Sand Filter GMX600F Blue

Lateral For S180T Hayward Pro Series Sand Filter SX200Q 2004 and Prior.

Flange Clamp For Hayward Pro Series Sand Filter GMX600NM

Lateral For Hayward Pro Series Sand Filter SX240D Lateral For S210T, S220T, S230T, S244T 2004 and Prior.

Sand Shield For Hayward Pro Series Sand Filter SX202S 2004 Corrugated Design.

Drain Cap Kit For Hayward Pro Series Sand Filter SX180HG