Orifice Tip with Tip Guard For Polaris 380 Pool Cleaner B25

In-Line Filter Screen For Polaris 380 Pool Cleaner 48-222

Water Managment System For Polaris 380 Pool Cleaner 9-100-7010

380 Pool Cleaner Leaf Bag made by Polaris 9-100-1012

Polaris 380 Diagram and Troubleshooting If the Polaris cleaner displays the following actions, adjustments may be necessary to restore performance. Refer to exploded parts diagram for part references. Action: Cleaner hangs up on steps or other obstacles for longer than 3 minutes. Solution: Check the wheel RPM. Verify the back-up valve is cycling. Adjust the thrust jet. Remove unnecessary swimming pool hardware or install a Ladder Guard Kit (order part #G21 from a Polaris dealer). Action: Polaris is sluggish, running with less power than normal. Solution: Check the filter screen in the in-line filter and clean, if necessary. Clean the skimmer basket, pump basket, and swimming pool filter. Check all of the hoses, connections, and swivels for leaks that could cause loss of water pressure. Check the wheel RPM. Action: Polaris flies around the swimming pool and/or does not make contact with the bottom. Solution: Confirm that the blue restrictor disk is installed in the UWF to decrease water flow. Or, install the red restrictor disk to decrease water flow even more. Check the wheel RPM. If more than 32 RPM, unscrew the pressure relief valve to decrease water flow to cleaner. Note: The pressure relief valve should only be
…read more

Base Assembly For Polaris 380 Pool Cleaner 9-100-7026

Trans Pulley For Polaris 380 Pool Cleaner 9-100-1007

Feed Hose Float For Polaris 380 Pool Cleaner D10

Turbine Lower Housing For Polaris 380 Pool Cleaner 9-100-1155

380 480 Pool Cleaner Sweep Hose Weight made by Polaris B2