Polaris Float Arm Repair Kit 180 Pool Cleaner A45
January 24, 2013 in Mixed Parts by PoolSpaRemote
180 Pool Cleaner Float Arm Repair Kit made by Polaris A45
January 24, 2013 in Mixed Parts by PoolSpaRemote
180 Pool Cleaner Float Arm Repair Kit made by Polaris A45
January 24, 2013 in Mixed Parts by PoolSpaRemote
Oscillator Kit For Kreepy Krauly SandShark Pool Cleaner GW7502 Includes: Small Sliding Seal (2) Oscillator Large Sliding Seal (2)
January 24, 2013 in Mixed Parts by PoolSpaRemote
Poolvergnuegen XL Dirt Bag for Pressure Cleaner 896584000-297 The Pressure POOLCLEANER ™ has the largest dirt bag currently on the market. This bag captures the dirt, leaves and other debris. The bag is easily removed and cleaned. The POOLCLEANER ™ dirt bag (pat) has an internal sock that acts as a trap door by stopping debris from falling back once the Pressure POOLCLEANER™ is shut off.
January 24, 2013 in Mixed Parts by PoolSpaRemote
Kreepy Krauly Legend II Feed Hose Mender with O-Ring #0252 made by Pentair LX20
January 24, 2013 in Mixed Parts by PoolSpaRemote
Switch Power Supply DYN Timer for Dolphin DX4 Robotic Pool Cleaner made by Maytronics 9995678-US-ASSY
January 24, 2013 in Mixed Parts by PoolSpaRemote
Bumper Strap With Weight For Kreepy Kadet Pool Cleaner K12655W
January 24, 2013 in Mixed Parts by PoolSpaRemote
In-Line Builder Valve Kit Pool Cleaner made by Pentair K12142B Vacuum Line Valve Kit We strongly recommend the use of the automatic regulator valve for maximum safety and performance. The valve automatically adjusts to changes in the amount of water flow to provide Kreepy Krauly with the power necessaiy to ensure proper cleaning performance. 1. Turn the pump off A 2. Close the main drain and all suction lines, except the line to which Kreepy Krauly will be connected. 3. Thread the snap-lock wall fitting into the end of the dedicated vacuum line 4. Install the automatic regulator valve (encased in the strainer guard) into the snap- lock wall fitting. See The Figure. Next, install the hose adapter into the end of the automatic regulator valve. See The Figure Below 5. Place Kreepy Krauly into the swimming pool and allow it to sink to the swimming pool floor. Continue to’ feed the hose vertically down into the swimming pool until it is completely filled with water and purged of all air. 6. Remove the hose protector from the female/female hose section and connect it to the end of the hose adapter installed into the automatic regulator valve. See The Figure
…read more
January 24, 2013 in Mixed Parts by PoolSpaRemote
ATV White MaxTrax Tire made by Polaris 5-4025
January 24, 2013 in Mixed Parts by PoolSpaRemote
Dura Life Diaphragm US Mex For Zodiac Baracuda X7 Pool Cleaner X73010
January 24, 2013 in Mixed Parts by PoolSpaRemote
PoolShark GW7700 Steering Kit Grey made by Pentair GW7515