Dynamite Pool Underwater Patch 9 lb. with Toggle Switch made by SGM PLBPP49

Dynamite Pool patch is a mixture of speciality cement and proprietary additives that permits underwater patching and general concrete repair work to be done instantly. Dynamite Pool patch can be used wherever a quick setting caulking or plugging material is needed.

To date, no specifications have been
industry approved. Our material is
tested and certified by independent
laboratories. All data is given in good
faith, however, we reserve the right to
change products and specifications
without notice. SGM advises interested
parties to satisfy themselves as to
the accuracy of any data and seek
certification if appropriate.

USES:

• Underwater swimming pool repair
• Underwater concrete repair
• New construction
• Remodeling

CHARACTERISTICS:

• High Strength
• Sets underwater
• Brilliant white

SURFACE PREPARATION:

Repair area must be clean and free
of any paint, dust or grease, Chisel
V-shaped channel to allow easy
application wherever possible. Dampen
area prior to application. When not
underwater.

APPLICATIONS:

Mix approximately one (1) part water
to three (3) parts swimming pool patch or until
material has a dough like consistency.
Warning: Warm water will accelerate
set time of patch. Mix only as much as
can be used in 3-5 minutes. Using
a steel trowel or pointed tool, force
material into hole or crack. Dampen
material for fifteen (15) minutes after
patching to prevent cracking.
To repair water leaks of for under-water
use, apply pressure for a minimum of
five (5) minutes or until material has
firmly set.

WARNING:
:

Eye Irritant Contains Portland Cement.
Product is alkaline on contact with
water. Use paddle for mixing to avoid
splashing into eyes or contact with
skin. During mixing or application,
avoid contact with eyes. In case of
such contact, flood eyes repeatedly
with water and CALL PHYSICIAN.
Wash thoroughly after handling and
before smoking or eating. Do not take
internally. KEEP OUT OF REACH OF
CHILDREN.