CVA-24T To Ortega Valve 2 in. Adapter Kit made by Pentair OVA2

APPLICATION:

Used to adapt Comswimming pool CVA-24T Valve Actuator to 2" Ortega 3-port valve.

KIT INCLUDES:

• Adapter Plate
• Cover O-ring Seal
• Cover O-ring Seals (3ea.)
• Shaft Coupling
• Shaft Coupling Mounting Screws (2 ea.)
• Valve Handle
• Valve Knob

INSTALLATION:

1. Remove handle, cover, stop screw and o-ring seals from Ortega
   Valve. Save cover screws.
2. Insert new O-ring Seals into bottom of Adapter Plate. Lubricate
   Seals with Comswimming pool Silicone Grease. In retrofit applications, it
   is advisable to remove the valve diverter and lubricate diverter
   seal at this time.
• Valves should be inspected and serviced at lease once a year. The valve diverter should be well lubricated, the O-ring seals should be intact, and the diverter should fit snugly and rotate smoothly
3. Mount Adapter plate to valve, using the existing cover screws.
4. Attach Shaft Coupling to valve shaft. ensure that pointer is
   oriented in the direction of theopenvalve port. Secure
   Coupling with Mounting Screws. Tighten Screws completely.
5. Attach Valve Handle to Valve Actuator, and secure with Valve
   Knob.
6. Connect cable between Valve Actuator, and Power Center.
   Line-up and attach Valve Actuator to Shaft Coupling in this
   position, reverse the cable plug on the side of the Valve
   Actuator so that the Actuator rotates to the correct position.
7. Secure to Adapter plate with Valve Actuator Mounting Screws.