Pool Drain Pipe made by Overflo 3001

Installation Instructions:

• Cut an area across Bondbeam, 5 inches wide and 1 inch deep at inside of swimming pool. Extending to 3 inches in diameter at outside of swimming pool.
• Place the rectangular opening 1/2 inch beyond Bondbeam inside of swimming pool (for tile allowance). Position rear 3 inch diameter opening slightly downward for gravity flow.
• Use waterproof mastic or grout to secure Overflo, keeping rectangular opening just under the bottom of the coping, other capping or cantilever deck.
• Attach 3 or 4 inch drain line to Overflo for dispersal to drainage area.