Paramount Suction Outlet SDX Retro Concrete 004192221201

SDX is a high flow suction outlet suitable for use as a wall fitting and also as a floor drain when debris removal is not a concern.
A Retro version is available to bring existing suction outlet covers into compliance with the new law.
SDX Retro fits existing plaster rings up to 10in. in diameter.
SDX boasts a flow rating of 200 gpm on the floor and 192 gpm on the wall making it compatible with most residential pumps up to 3 hp. SDX has a 1.485 feet per second velocity at the opening at a maximum listed 200 gpm.

FEATURES AND BENEFITS
NO SUMP REQUIRED – No need to chisel out a sump to meet the1.5 times the pipe diameter sump depth requirement.
SDX has a 1.485 feet per second velocity at the opening at a maximum listed 200 gpm.
Approved as a bulkhead fitting so the safety is in the cover and plate.
Patented ribbed design achieves high flow with sixty mini drains
Suction doesn?t transfer if one area is covered
Dome shape to prevent a seal by a swimmer
Anti-vortex shield blocks contact with direct suction
SDX retro can be installed as a single cover with an SVRS installed on the line.
Retro version fits existing suction outlets up to 10in. in diameter
Stainless steel security screws
Secondary support plate secured to protect the sump and fittings

With a flow rating of 200 gpm on the floor and 192 gpm on the wall SDX is compatible with pumps up to 3 hp. In most cases this eliminates the need to calculate the system total dynamic head. SDX has a 1.485 feet per second velocity at the opening at a maximum listed 200 gpm.

Meets National anti-entrapment requirements
ASME A112.19.8 2007 Listed
IAPMO tested and certified; a nationally recognized testing laboratory (NRTL) accredited by ANSI.
USPC (uniform swimming swimming pool, spa and hot tub code) compliant
IRC (International Residential Code), section 106.2 suction fittings compliant

SDX protects against all five types of entrapment; hair, limb, body suction, evisceration, and mechanical entrapment.
Order SDX for new swimming pool construction or when installing a new plaster ring
(such as when a new interior finish is being applied).
SDX is available for concrete, vinyl and one/piece fiberglass swimming pools
Order SDX Retro when replacing an existing suction outlet cover up to 10in. in diameter.
SDX Retro is available for concrete and vinyl swimming pool