by .Booster Pump Polaris Diagram
January 24, 2013 in Polaris Booster Pump by PoolSpaRemote
Polaris Booster Pump
The Polaris Booster Pump supplies pressure water to the Polaris swimming pool cleaner to optimize cleaner efficiency.
The Pumpis not self-priming and should only be used when the swimming pool filtration pump is on.
Running the booster pump without filtration pump will damage the booster pump.
Improper operation of the booster pump will oid the warranty.
 |
|||
| 1 | P5 | Volute (Includes Drain Plug) |  |
| 2 | P15 | Impeller |  |
| 3 | P55 | Seal |  |
| 4 | P95 | Bracket O-Ring |  |
| 5 | P10 | Bracket |  |
| 6 | P35 | Bolt, Stainless, Bracket to Motor | |
| 7 | P40 | O-Ring for Shaft | |
| 8 | B121 | Polaris Booster Pump Motor 0.75 HP |  |
| P61 | Motor, ¾ HP, Threaded Shaft, 60 Hz |  |
|
| 9 | P25 | Bolt/Nut, Stainless for Volute to Bracket | |
| 10 | P80 | Rubber Strip, Motor/Bracket | |
| 11 | P70 | Pump Stand with Feet, Strip |  |
| 12 | P75 | Rubber Feet | |
| 13 | P65 | Bolt, SS, Stand to Bracket and Motor | |
| 14 | P20 | 1⁄8" NPTM Plug, Plastic | |
| 15 | P17 | Installation Kit, Softube Quick Connects |  |
| 16 | P19 | Pump Hose, 6 ft., Flexible Reinforced |  |
| 17 | P133 | Softube Quick Connect |  |
| 18 | P21 | Pump Quick Connect Retainer | |
| • | V40-401 | Shaft Screw |  |
| • | V40-116 |  |
|
| • | B05 V32-606 |
 |
|
| • | HPF8C | Booster Pump Polaris Hose to Pipe Brass Adapter |  |
| • | Not Shown in the Diagram. | ||