Max-E-Glas Dura-Glas Pump Sta-Rite 1 HP Motor SQ1102
1:03 am
Square Flange Threaded Shaft 1.0 HP Motor made by A.O.Smith SQ1102 HP 1 RPM 3450 Volts 115/230 Frame 48Y Phase 1 Encl Open D.P.
1:03 am
Square Flange Threaded Shaft 1.0 HP Motor made by A.O.Smith SQ1102 HP 1 RPM 3450 Volts 115/230 Frame 48Y Phase 1 Encl Open D.P.
1:03 am
DURA-GLAS and MAX-E-GLAS CENTRIFUGAL PUMPS with TRAP Failure to pump Reduced capacity or discharge pressure Suction leaks/lost prime: Pump must be primed; make sure that pump volute and trap are full of water. Make sure there are no leaks in suction piping. Make sure suction pipe inlet is well below the water level to prevent pump from sucking air. If suction trap gasket is defective, replace it. Suction lift of 15 to 25 feet (4.5 to 7.5 meters) will reduce performance. Suction lift of more than 25 feet (7.5 meters) will prevent pumping and cause pump to lose prime. In either case, move pump closure (vertically) to water source. Make sure suction pipe is large enough. Clogged pipe/trap/impeller, worn impeller: Make sure suction trap is not clogged; if it is, clean trap and strainer. Make sure impeller is not clogged, check impeller for clogging Impeller and diffuser may be worn. If so, order replacement parts from Repair Parts List Pump may be trying to push too high a column of water. If so, a “higher head” pump is needed. Electrical: Pump may be running too slowly; check voltage at motor terminals and at meter while pump is running. If low,
…read more
1:03 am
Sta-Rite DynaGlas Pump FAILURE TO PUMP REDUCED CAPACITY OR DISCHARGE PRESSURE Suction leaks/lost prime: Pump must be primed; make sure that pump volute and trap are full of water. Make sure there are no leaks in suction piping. Make sure suction pipe inlet is well below the water level to prevent pump from sucking air. If suction trap gasket is defective, replace it. Make sure pump is not trying to lift water more than 10′(3m). Make sure suction pipe is at least 2" (51mm) in diameter. Clogged pipe/trap/impeller, worn impeller: Make sure suction trap is not clogged; if it is, clean trap and strainer. Make sure impeller is not clogged Impeller and diffuser may be worn. If so, order replacement parts from Repair Parts List 1 SQ1052 Motor 1/2 HP SQ1072 Motor 3/4 HP SQ1102 Motor 1 HP SQ1152 Motor 1 1/2 HP SQ1202 Motor 2 HP 2 U30-692SS Screw #10-32×1/2" 3 U17-568 Bonding Lug 4 C69-24 Slinger 5 C3-184P Seal Plate 6 U9-373 Seal Plate O-ring 7 37400-0027 PS-201 Shaft Seal 8 C105-236P Impeller 3/4 HP C105-236PB Impeller 1 HP C105-236PC Impeller 1 1/2 HP C105-236PDA Impeller 2 HP C105-236PEA Impeller 2 1/2 HP 9 C1-270PB
…read more
1:03 am
Max-Flo II Pump The Hayward Max-Flo II™ is a series of high technology self-priming pumps that combines performance, dependability and value with durable corrosion-proof construction. Designed for swimming pools of all types and sizes, Max-Flo II features a Tri-Lock cam and ramp strainer cover with a extra leaf-holding capacity strainer basket. Max-Flo II also features 2-inch threaded ports, a heavy-duty motor designed to operate in environments up to 122 degrees F, an elevated base for improved motor cooling and to prevent flooding. The Max-Flo II is an ideal choice for both new construction or as a replacement pump. Self-priming. Tri-Lock cam and ramp strainer cover are designed to seal with less than quarter turn. Clear strainer cover lets you see when the basket needs cleaning. Pressure testable to 50 psi MAXIMUM. Large leaf holding capacity strainer basket extends time between cleanings. Heavy-duty, high performance motor is designed to operate in environments up to 122° F. Elevated base insures better air circulation for cooler running and prevents flooding. All components molded of corrosion-proof reinforced engineered plastic for extra durability and long life. Service-Ease Design provides easy access to all internal components by just removing 4 bolts. 1 SPX2700DLS Strainer Cover Kit
…read more