by Natural Chemistry Pool Water Instant Conditioner 1 gal. 07401
January 24, 2013 in Balancers by PoolSpaRemote
1 gal. Pool Water Instant Conditioner made by Natural Chemistry 07401
Instant Pool Water Conditioner protects your chlorine from the light of the sun. With a highly concentrated liquid formula it is easy to apply and safe for use with all sanitizers and swimming pool surfaces.
- fast acting liquid
- swimming pool friendly pH of 8.0
- will not damage swimming pool surfaces or equipment
Dosage:
1 gallon (3.79L) increases CYA level to 32ppm per 10,000 gallons (38,000L)
Dosages for fresh water start up (no cya present): Divide swimming pool volume in gallons by
10,000 gallons to determine the number of gallons of Instant Pool Water Conditioner required
How to Apply:
1. SHAKE WELL
2. With circulation pump running pour Instant Pool Water Conditioner into swimming pool skimmer
slowly OR pour directly into swimming pool water, while walking around perimeter of swimming pool brush
to speed absorption
3. Rinse container with swimming pool water and shake
4. Pour remaining rinse solution into skimmer or swimming pool
Maintenance:
1. Measure CYA level in swimming pool using cyanuric acid test or have it tested by a professional dealer
2. If CYA level is less than 30ppm, calculate gallons of Instant Pool Water Conditioner needed using the following
formula: (4oz/10,000 gallons= 1ppm increase of conditioner stabilizer level)
Tips:
Once entire contents of the bottle is used, add water to shake bottle- pour contents into skimmer
Features & Benefits:
Dissolves instantly
Pool friendly pH
Protects chlorine immediately
Will not harm any equipment or swimming pool surface