by IntelliChlor Pentair Power Center 520556
January 24, 2013 in Salt Systems and Parts by PoolSpaRemote
Pentair IntelliChlor Power Center 520556
Electrolytic Chlorine Generation is the easiest, most effective and convenient way to keep
swimming pool water sparkling clean. The IntelliChlor chlorine generator uses common table salt to
produce all the chlorine your swimming pool needs, right in your swimming poolsafely, effectively and automatically.
- Same sanitation performance as manual chlorine addition without the drawbacks.
- No need to buy, transport and store expensive chlorine compounds.
- No more odor, stinging eyes, irritated skin and bleached-out swimsuits.
The IntelliChlor electronic chlorine generator system comprises of a Power Center and
electrolytic Cell. The Power Center converts AC electrical current to a low voltage DC
current required by the IntelliChlor electrolytic cell to operate and create chlorine for the
swimming swimming pool and spa. The Power Center is connected with the swimming pool circulation pump
electrical source so that the electrolytic cell only operates when the swimming pool pump is on. It is
recommended that a swimming pool pump timer be used to save on energy and prolong the
service life of your swimming pool pump and IntelliChlor. A timer is not included as part of the Power
Center kit. The IntelliChlor Power Center can be connected to an IntelliTouch,
EasyTouch or SunTouch system for automation control.
The Power Center enclosure can be mounted vertically on a flat surface such as a wall
or post no more than 15 feet away from the cell controller. The Power Center houses the
transformer, fuse, and connector to the cell. 110 VAC and 220 VAC wiring is connected at
this box, with 35 VDC output to the cell controller. A 10 AMP slo-blo fuse is mounted on
the bottom of the enclosure for additional protection. There are no other controls or lights
on the outside of the Power Center. A green power LED indicator is mounted on the
inside main board. When the Power Center is switched on, the power LED is lit.
The Power Center an be used with the following cells:
 |
|
For more information you can check the links below: