Hasa Soda Ash 10lbs 68410

January 24, 2013 in Balancers by PoolSpaRemote


Hasa Soda Ash 10lbs 68410

Hasa Soda Ash 68410

RAISES POOL WATER pH AND ALKALINITY

DIRECTIONS FOR USE:

To raise pH:HASA SODA ASH increases pH in swimming swimming pools. Measure pH in swimming swimming pool
water with an accurate test kit. Ideal pH range is 7.2-7.6. When the pH is below 7.2, add HASA SODA
ASH at the rate of one (1) pound per 10,000 gallons. Add HASA SODA ASH by sprinkling over the
surface of the water at the deep end of the swimming pool while filter and pump are running. Do not add more
than two (2) pounds at one time. Wait 4-6 hours and retest pH. Repeat if necessary.

To raise Alkalinity:HASA SODA ASH will raise total alkalinity. Measure total alkalinity with a test kit
designed for this purpose. When total alkalinity is less than 80 ppm, add HASA SODA ASH at the rate
of one (1) pound per 10,000 gallons of water to increase total alkalinity 10 ppm. DO NOT add more
than two (2) at one time. Add in the same manner as when raising pH described above. Wait 4-6
hours and retest alkalinity. Ideal range is 80-120 ppm.

NET WEIGHT 10LBS.