DECK-O-SEAL Deck-O-Foam Expansion Joint Filler 1413035

January 24, 2013 in Leak and Tile Repair Products by PoolSpaRemote


DECK-O-SEAL Deck-O-Foam Expansion Joint Filler 1413035

Deck-O-Foam Expansion Joint Filler made by DECK-O-SEAL 1413035

1/2"  x  3-1/2"  x  50′

DESCRIPTION
DECK-O-FOAM expansion joint filler is a flexible, lightweight, non-staining, polyethylene, closed-cell expansion joint filler. It is a chemical-resistant, ultraviolet stable, non-absorbent, low density, economical, compressible foam that offers an extended service life in both interior and exterior applications.

DECK-O-FOAM is supplied with a convenient, pre-scored removable strip to provide a uniform sealing reservoir in the joint. It also serves as a sealant bond-breaker and provides an economical alternative as an expansion joint in all concrete paving projects. It is compatible with all currently available cold-applied sealants.

USES
DECK-O-FOAM is ideal for use as an expansion, contraction, and/or isolation joint in swimming swimming pool decks, curb and gutter work, floor slabs, pavement patch repair, sidewalks, driveways, plazas, parking decks, highways, and airport runways.

FEATURES AND BENEFITS
  • Pre-scored strip is easily removed.
  • Economical alternative to expansion joints.
  • Controls amount of sealant needed and acts as a bond-breaker.
  • Eliminates costly sawing and routing.
  • Flexible, lightweight and can be formed around curved objects.
  • Easy to install.
  • Can be used in interior or exterior applications.
LEED INFORMATION
May help contribute to LEED credits:
  • MR Credit 5.1: Regional Materials: 10% Extracted, Processed & Manufactured Regionally
  • MR Credit 5.2: Regional Materials: 20% Extracted, Processed & Manufactured Regionally

TECHNICAL DATA**

.
TEST METHOD
TYPICAL VALUE
Color
N/A
Gray
Density
ASTM D 1622
2.0 lb./ft.(32.04 kg/m?)
Compression . .
10% Deflection
ASTM D 3575
10 psi (69 KPa) max.
80% Deflection
ASTM D 3575
125 psi (862.49 KPa) max.
Tensile Strength
ASTM D 3575
55 psi (379.50 KPa)
Water Absorption
ASTM D 3575
0.5% vol. max.
Temperature Stability
N/A
-40 F to 160F (-40C to 71C)
** These physical properties are typical, but should not be used in specifying material due to differences that could result from variations in testing methods.

APPLICATION
Attach DECK-O-FOAM securely to the existing concrete slab, coping or form with tape or mechanical fasteners prior to pouring the next slab. Make sure that DECK-O-FOAM is level with the desired slab surfaces before finishing. If specifications require the use of a cold-applied sealant, remove the pre-scored strip and apply the sealant following the manufacturers instructions.

No Comments »