Goldline Salt Water Chlorine Generator Aqua Rite Turbo Cell T-CELL-15 The Turbo Cells automatically generate a self-renewing supply of fresh, pure chlorine for water that’s clean, clear and luxuriously soft. T-CELL-15 is for swimming pools up to 40,000 gallon swimming pools. Servicing and Cleaning the Aqua Rite cell Turn off power to the Aqua Rite before removing the electrolytic cell. Once removed, look inside the cell and inspect for scale formation (light colored crusty or flaky deposits) on the plates and for any debris which has passed through the filter and caught on the plates. If no deposits are visible, reinstall. If deposits are seen, use a high pressure garden hose and try to flush the scale off. If this is not successful, use a plastic or wood tool (do not use metal as this will scratch the coating off the plates) and scrape deposits off of plates. Note that a buildup on the cell indicates that there is an unusually high calcium level in the swimming pool (old swimming pool water is usually the cause). If this is not corrected, you may to have to periodically clean the cell. The simplest way to avoid this is to bring the
…read more

Fuse Yellow 20A made by Hayward GLX-F20A

Intermatic Salt Chlorine Generator 25.000 gal. PE25K120V Intermatic’s stand alone salt chlorine generator eliminates unnecessary or extraneous features to make it the easiest salt chlorine generator to operate and provides the ability to communicate with other components within the existing swimming pool/spa system Features Maximum 25,000 gallons 120 Volt Model Produces 1.1 lbs of chlorine every 24 hours Specs Case: 15.0″ (38.3 cm) high x 10.5″ (26.8 cm) wide x 4.5″ (11.4 cm) deep Voltage: 120VAC Shipping Weight: 22.0 lbs Agency Approval: ARL

Control Center For Jandy Salt Water Genenerator APUREM Product Description The AquaPure and PureLink Systems use a process known as electrolysis to produce sodium hypochlorite (liquid chlorine) from a low concentration of salt added to the swimming pool water. Hypochlorite kills bacteria, oxidizes organic material. and kills algae then reverts back to salt. The system then reuses the salt and the process starts over again. The systems are comprised of the following components: Aqua Pure Control Center (for stand alone systems) The AquaPure control center converts AC power into low voltage DC current which is required by the cell to perform the electrolysis. The LCD display on the user interface offers monitoring of chlorine production, cell modes, salinity level, temperature, water flow and diagnostics. The control center is connected with the swimming pool circulation pump electrical source so that the electrolytic cell can only operate when the swimming pool pump is on. An optional swimming pool pump timer can be utilized to help control this lilnction. The flow portion of the Flowith Temp/Salinity Sensor is a backup device only. AquaLinkRS PureLink Power Center (for PureLink systems) The PureLink system is an all-in-one salt water chlorinator control system power center and
…read more

AquaPure Ei APURE35 APURE35C R-Kit Power PCB made by Jandy R0512100

Jandy Cell Kit For APURE700 Salt Water Generator 3-Port R0452300 Includes: Cell, O-Rings, 16′ DC Cord

Pentair IntelliChlor Power Center 520556 Electrolytic Chlorine Generation is the easiest, most effective and convenient way to keep swimming pool water sparkling clean. The IntelliChlor chlorine generator uses common table salt to produce all the chlorine your swimming pool needs, right in your swimming poolsafely, effectively and automatically. Same sanitation performance as manual chlorine addition without the drawbacks. No need to buy, transport and store expensive chlorine compounds. No more odor, stinging eyes, irritated skin and bleached-out swimsuits. The IntelliChlor electronic chlorine generator system comprises of a Power Center and electrolytic Cell. The Power Center converts AC electrical current to a low voltage DC current required by the IntelliChlor electrolytic cell to operate and create chlorine for the swimming swimming pool and spa. The Power Center is connected with the swimming pool circulation pump electrical source so that the electrolytic cell only operates when the swimming pool pump is on. It is recommended that a swimming pool pump timer be used to save on energy and prolong the service life of your swimming pool pump and IntelliChlor. A timer is not included as part of the Power Center kit. The IntelliChlor Power Center can be connected to an IntelliTouch, EasyTouch
…read more

Pentair IntelliChlor Salt Chlorinator Flow Switch Replacement Kit 520736 Replacement kit contents: Flow-Temperature switch assembly Two pair-at-a-time splicer For flow switch installation guide click here.

Fuse Violet 3A 10 Pack made by Hayward GLX-F3A-10PK