Shaft 1/4"-20 x 5/16" Screw for Polaris Booster Pump V40-401

Shaft Seal for Polaris Booster Pump P55 PS-1000 INSTALLATION INSTRUCTIONS FOR REPLACEMENT SEALS Disassemble pump cavity to expose defective seal. Removal of old seal and installation of new seal requires careful operations and precautions. CAUTION: Lapped and polished faces of new seal are easily scratched and damaged. PROTECT FROM DAMAGE, DIRT and FINGER PRINTS. Carefully remove old seal head and seat taking care not to scratch shalt or seat counterbore. NOTE HOW OLD SEAL IS ASSEIVIBLED. BE SURE REPLACE MENT SEAL IS INSTALLED IN IDENTICAL MANNER. Clean shaft and counterbore surfaces using fine emery cloth or equivalent Remove rust, burrs, and wipe clean. Shaft, seat counterbore and rubber members of seal head and seat should be lubricated with a lubricant compatible with the seal elastomers. U.S SEALUBE is recommended and available from US Seal. U.S. SEALUBE is a WATER BASED formula specifically designed to lubricate rubber making the installation of mechanical seals fast and easy. It provides a high degree of lubricity to all rubber components. It maintains its wetness for a short period of time allowing for easy installation of a mechanical seal. NEVER use PTFE or SILICONE based lubricants. Check seal surfaces to be sure they are free
…read more

A.O. Smith Centurion 1081 Standard C-Frame Keyed Motor 3/4 HP B121 HP 3/4 RPM 3600 Volts 230/115 Frame 56C Phase 1 Encl Open To use the A.O. Smith Centurion 1081 B121 as a replacement motor for a Polaris Booster Pump You have to use with it Polaris Booster Pump Shaft Screws (3) Polaris Booster Pump Shaft Extention

Bracket O-Ring for Polaris Booster Pump P95

Threaded Shaft, 60 Hz Motor for Polaris Booster Pump P61

Bracket for Polaris Booster Pump P10