Shaft Seal for Aqua-Flo A-Series Pump 92509040 PS-1000 INSTALLATION INSTRUCTIONS FOR REPLACEMENT SEALS Disassemble pump cavity to expose defective seal. Removal of old seal and installation of new seal requires careful operations and precautions. CAUTION: Lapped and polished faces of new seal are easily scratched and damaged. PROTECT FROM DAMAGE, DIRT and FINGER PRINTS. Carefully remove old seal head and seat taking care not to scratch shalt or seat counterbore. NOTE HOW OLD SEAL IS ASSEIVIBLED. BE SURE REPLACE MENT SEAL IS INSTALLED IN IDENTICAL MANNER. Clean shaft and counterbore surfaces using fine emery cloth or equivalent Remove rust, burrs, and wipe clean. Shaft, seat counterbore and rubber members of seal head and seat should be lubricated with a lubricant compatible with the seal elastomers. U.S SEALUBE is recommended and available from US Seal. U.S. SEALUBE is a WATER BASED formula specifically designed to lubricate rubber making the installation of mechanical seals fast and easy. It provides a high degree of lubricity to all rubber components. It maintains its wetness for a short period of time allowing for easy installation of a mechanical seal. NEVER use PTFE or SILICONE based lubricants. Check seal surfaces to be sure they are free
…read more

A.O. Smith Centurion 1081 Standard C-Frame Keyed Motor 3 HP B125 HP 3 RPM 3600 Volts 230 Frame 56C Phase 1 Encl Open

Aqua-Flo A-Series Pump Brass Lid 5″ 91230000 V40-463

Aqua-Flo A-Series Pump Shaft Screw 1/4"-20 x 5/16" 99730000 V40-401

A.O. Smith Centurion 1081 Standard C-Frame Keyed Motor 2 HP B124 HP 2 RPM 3600 Volts 230 Frame 56C Phase 1 Encl Open

Lid O-Ring for Aqua-Flo A-Series Pump 92200000

H & F Gasket for Aqua-Flo A-Series Pump 91500059 G44 V40-115 We suggest You use RTV Silicone with this gasket. The Novagard RTV 400-150 silicone is a noncorrosive, single-component, oxime silicone sealant and/or adhesive. A non-flowable, paste product RTV 400-150 presents an excellent balance between rate of cure, adhesion and physical properties. Click on the image to follow the link.

A.O. Smith Centurion 1081 Standard C-Frame Keyed Motor 1/2 HP B120 HP 1/2 RPM 3600 Volts 230/115 Frame 56C Phase 1 Encl Open

Trap 5″ Gasket for Aqua-Flo A-Series Pump 91500150 G-57 V40-118 We suggest You use RTV Silicone with this gasket. The Novagard RTV 400-150 silicone is a noncorrosive, single-component, oxime silicone sealant and/or adhesive. A non-flowable, paste product RTV 400-150 presents an excellent balance between rate of cure, adhesion and physical properties. Click on the image to follow the link.

Aqua-Flo A-Series Pump Strainer Plastic Base Foot 91100100