HASA SANI-CLOR LIQUID CHLORINE 45-14H HASA SANI-CLOR is a sodium hypochlorite solution, marketed for use in the treatment of water in swimming swimming pools, spas, and hot tubs. With the one exception of chlorine gas, it is the least expensive form of disinfecting swimming swimming pool upon application destroying algae, bacteria, viruses, and other micro organisms. STORAGE AND DISPOSAL:Store this product in a cool, dry area, away from direct sunlight and heat to avoid deterioration. In case of spill, flood areas with large quantities of water. Product or rinsates that cannot be used should be diluted with water before disposal in a sanitary sewer. Do not contaminate food or feed by storage, disposal, or cleaning of equipment. Return Container to dealer or distributor for deposit refund. SWIMMING POOL WATER DISINFECTION:For a new swimming pool or spring start-up, super-chlorinate with 52 to 104 ounces of product for each 10,000 gallons of water to yield 5 to 10 ppm available chlorine by weight. Check the level of available chlorine with a test kit. Adjust and maintain swimming pool water pH to between 7.2 to 7.8. Adjust and maintain the alkalinity of the swimming pool to between 50 to 100 ppm. To maintain
…read more

HASA MURIATIC HYDROCHLORIC LIQUID ACID 45-24H For Swimming Pools Lowers pH and Alkalinity HASA MURIATIC ACID is an acidic solution of 31.45% hydrochloric acid in water, marketed for use in swimming swimming pools, spas, and hot tubs. HASA MURIATIC ACID mixes instantly with swimming pool and spa water to reduce scale caused by high pH and/or high alkalinity. DIRECTIONS FOR USE:This product reduces pH to minimize scale. Use as required to maintain pH between 7.2-7.6. Use a reliable test kit. Do not overdose. When in doubt use less muriatic acid. To reduce pH, add one quart HASA MURIATIC ACID per 20,000 gallons of swimming pool water per 24 hours. Add acid cautiously at deep end and at least one foot from swimming pool wall. Pour slowly over as large an area as possible. The recirculation system (filter and pump) must be running while adding HASA MURIATIC ACID and for at least one (1) hour after the addition. Repeat as necessary at 24 hour intervals. INGREDIENTS: ACTIVE INGREDIENTS: Hydrogen Chloride……….. 31.45% INERT INGREDIENTS: ……….. 68.55%