Body Panel Right B for Zodiac Baracuda MX8 Automatic Suction Side Pool Cleaner R0526600

Lower Body Housing for Zodiac Baracuda MX8 Automatic Suction Side Pool Cleaner R0525700

Drive Shaft Assembly for Baracuda MX8 Automatic Suction Side Pool Cleaner R0525100

Leaf Catcher Hose Adaptor for Zodiac Baracuda MX8 Automatic Suction Side Pool Cleaner X77094

Wheel Engine Bearing for Zodiac Baracuda MX8 Automatic Suction Side Pool Cleaner R0527000

Body Panel Front C for Zodiac Baracuda MX8 Automatic Suction Side Pool Cleaner R0525500

Track Tire for Baracuda MX8 Automatic Suction Side Pool Cleaner R0526100

Cleaner does not move or moves slowly. Confirm that the main drain is closed. Use Flow Gauge to verify proper flow. Check for debris jammed in engine. Backwash filter and empty pump basket. Check for air in system. If water level in pump basket drops or you see excessive air bubbles in the pump basket or coming from the return lines, there is air in the system. Check hose connections, tighten all fittings at pump and check o-ring at pump basket for wear. Cleaner patterns, does not cover entire swimming pool. Use Flow Gauge to verify proper flow. Ensure return fittings are directed down. Add a return diverter if necessary. Make sure hose is not kinked or coiled. Lay in sun to straighten if necessary. Verify correct hose float positioning. Observe cleaner for more than five (5) minutes and ensure that each drive track is periodically reversing direction. If it is not, contact you dealer or service center for help. Confirm proper hose length. Cleaner gets stuck at steps. Observe cleaner for more than five (5) minutes and ensure that each drive track is periodically reversing direction. If it is not, contact you dealer or service center for help. Ensure
…read more

Lower Engine Housing for Zodiac Baracuda MX8 Automatic Suction Side Pool Cleaner R0525800

Inlet Assembly for Zodiac Baracuda MX8 Automatic Suction Side Pool Cleaner R0525300