Fix A Leak For Swimming Pools, Spas and Hot Tubs 32 oz. made by Marlig FAL32 FIX-A-LEAK is a blended concentrated material designed to seal leaks in virtually any material, can be applied for leaks in the shell and works equally well in plumbing, will seal holes 1/8″ in diameter, will form a long lasting seal, use 1 quart per swimming pool up to 22.000gallons. Suction Line Leaks Suction Leaks are usually known by air mixed with the water at the return fittings. In most cases suction lines only leak water when the filter pump is shut off. Normal Circulation will simply draw?FIX-A-LEAKaway from the leak and if the?pump is shut off the material will simply not get to the leak.You must reverse the?flow of water, to force the material through the leak under pressure.Preferably?5-10 psi. untill the leak has stopped.When this has been achieved, gradually?increase pressure to 15-25 psi. to insure a proper seal. VERY IMPORTANT: After sealing a suction leak “it” is a must to leave suction?off the repaired line for no less than 48 hrs.FIX-A-LEAKrequires time to cure and harden. Miscellaneous Leaks If you suspect a leak around fittings inside the swimming pool (such as return fittings)
…read more