Pentair Cover Control IntelliFlo Variable Speed Pump 350601
1:03 am
Cover Control Assembly Assembly for Pentair IntelliFlo Variable Speed Pump made by Pentair 350601
1:03 am
Cover Control Assembly Assembly for Pentair IntelliFlo Variable Speed Pump made by Pentair 350601
1:03 am
Drive Assembly for Pentair IntelliFlo IntelliPro Variable Speed Pump made by Pentair 353251 Kit Contents IntelliFlo or IntelliPro Drive Assembly — (Qty. 1) FWC Cover Assembly — (Qty. 1) – P/N 350621 Almond color Control Cover Assembly — (Qty. 1 ) – P/N 350601 Almond color Screw 10-24 X 3‘/4 inch PH MS 18-8 s/s — (P/N 350107, Qty. 3) IntelliFlo Drive Gasket — (P/N3 50108, Qty. 1) Spacer Cap — (P/N 350142, Qty. 3) → New cover use on VF Drives mid summer 2011. (Look inside cover for 400XXX part numbers). Introduction The IntelliFlo Drive Assembly Replacement Kit contains everything you need to replace the existing drive assembly on the Intel1iFlo Variable Speed Pump. Drive Assembly Removal an Replacement. Make sure all electrical breakers and switches are turned off’ before removing the drive assembly. Disconnect the communication cable from the pump. Open the control panel cover. Remove the three Phillips head screws securing the drive to the motor assembly as shown. Lift up the drive assembly and disconnect it from the motor adapter connector located on top of the motor assembly. Remove the drive assembly. Installation Make sure all electrical breakers and switches are tuned off before installing the
…read more
1:03 am
The IntelliFlo Variable Speed pump is well suited for all of your swimming pool, spa, cleaner, waterfall and other water applications. Using the control panel, IntelliFlo can use one of the four selectable preset speeds or the pump speed can be adjusted to run at a specifi c speed. Advanced energy conservation features ensure that your fi ltration system is operating at peak effi ciency. The IntelliFlo pump is a variable speed pump that can use up to eight speeds that can be adjusted to run at specifi c speeds and time intervals. The IntelliFlo Variable Speed pump out performs all conventional pumps in its class. The pump can operate from 450 RPM to 3450 RPM with preset speeds of 750, 1500, 2350 and 3110 RPM. The pump can be adjusted from the control panel to run at any speed between 450 RPM to 3450 RPM for different applications. The pump control panel alarm LED and error messages warn the user against under and over voltage, high temperature, over current and freeze protection with user defi ned minimum and maximum speed presets.The IntelliFlo pump can communicate with an IntelliTouch, EasyTouch, or SunTouch control system or the IntelliComm communication center via
…read more