Autopilot Pool Pilot Nano Salt Water Chlorine Generator DN1

January 24, 2013 in Salt Systems and Parts by PoolSpaRemote

The Package includes:

Autopilot Pool Pilot Nano Chlorine Generator Maifold 94105
Pool Pilot Nano Chlorine Generator Power Supply 110V 75040

The Pool Pilot Digital Nano is a salt chlorination system designed for swimming pool or spa water purification.

The system requires a low concentration of dissolved salt (sodium chloride) in the water. The salt concentration
level is normally maintained below the taste threshold. The Nano automatically converts the salt into
chlorine, which your swimming pool/spa requires to remain sanitized and algae free. The chlorine reverts back to
salt after treating the water. Since the salt is constantly recycled, there is minimal loss during a swimming
season. However, salt can be lost due to filter backwashing, rain water overflow, leaks, or bather splashing/
carry out… but not through evaporation.

The Digital Nano is designed to handle the purification needs of residential
swimming swimming pools and spas. The amount of chlorine required for proper
sanitization will vary based on the swimming pool size and various factors such as water
temperature, bather load, exposure to direct sunlight, and special water features.

The water circulation pump must be operating for your Nano to produce chlorine,
so run time is one of several key components to maintaining the proper sanitizer
levels. Most installations require a minimum of eight (8) hours-per-day
pump run time to properly filter and sanitize the water.

Maintains swimming pools up to 22,000 gallons
Produces 0.8 lbs. of chlorine per day
Patented temperature compensation
24 & 72 hour boost cycles

Operates at all salt levels –
2,000-35,000 ppm (2 to 35 g/L)
Operates in water up to 104F/40?C
Push button controls
Operates at flow rates less than 15 gpm

Nano Features:	No more red eyes No more itchy skin No more green hair No more vacation worries	No more faded swimwear Energy efficient Environmentally friendly Automatic cell cleaning
Never buy chlorine again Soft, silky water

Manifold features include:

In-line Strainer – The in-line strainer protects the Tri-Sensor and the Cell from debris that may by-pass the filter and obstruct either component. The location of the strainer in the connecting union makes it easy to remove for periodic cleaning.
Tri-Sensor – The Tri-Sensor is a three way sensing device which measures flow, salt level, and water temperature.
Chlorine Production Cell – The cell produces 100% pure Sodium Hypochlorite in your swimming pool plumbing returning it to your swimming pool.
Check Valve – The check valve in the Manifold allows all water flowing through the plumbing at a rate greater than 20 gallons per minute to by-pass the production cell to maximize the production of chlorine.