Hayward Super II

The Hayward Super II Pump is specifically engineered for the demanding requirements of today’s in-ground swimming swimming pool/spa that
is equipped with large capacity filters, heaters, and swimming pool cleaning equipment. The Super II is a self-priming pump that incorporates an
improved seal and impeller design that will provide many years of efficient, dependable, corrosion-free service. The advanced design
provides superior performance while reducing maintenance requirements.

• Super-sized 180 cubic-inch basket has extra leaf-holding capacity and extends time between cleanings. Rigid
  construction with load extender ribbing assures free flowing operation for heavy debris loads.
• Easy-Thread design makes strainer cover removal easy. No tools required, no loose parts, and no clamps.
• Lexan see-thru strainer cover lets you see when the basket needs cleaning. Test feature allows line pressure test to 40
  PSI MAXIMUM.
• All components molded of corrosion-proof glass-filled polypropylene for extra durability and long life.
• Heavy-duty, high-performance motor with airflow ventilation for quieter, cooler operation.
• Uni-bracket mounting base provides stable, stress-free support, plus versatility for any installation requirement. Adapts to 48 and 56 frame motors.
• Heat resistant, industrial size ceramic seal.
• Rugged, one-piece housing, with full-flow ports, assures rapid priming and continuous operation.
• Totally balanced, Noryl high-head impeller provides high-volume output to accommodate even the most demanding
  installations, including swimming pool/spa combinations and in-floor cleaning systems.
• Service-ease design gives simple access to all internal parts. Motor and entire drive group assembly can be removed, without disturbing pipe or mounting connections, by disengaging just six (6) bolts.

1	SPX3000AA	Pump Housing/Strainer, 1 1⁄2" x 1 1⁄2", with Drain Plugs
	SPX3100AAZ	Pump Housing/Strainer, 1 1⁄2" x 1 1⁄2", with Drain Plugs, threaded style
	SPX3020AA	Pump Housing/Strainer, 2" x 2", with Drain Plugs
	SPX3120AAZ	Pump Housing/Strainer, 2" x 2", with Drain Plugs, threaded style
2	SPX3000M	Basket
3	SPX3000S	Strainer Cover O-Ring
4a	SPX3000D	Strainer Cover, clear
4b	SPX3100D	Strainer Cover, Thread Style (E-Z Fb, Az)
5	SPX3000T	Housing Gasket
—	SPX1600R	Diffuser Gasket – Not Shown
6	SPX2600B	Diffuser, for 3/4 through 2 H.P. (1987 and prior)
	SPX3000BN	Diffuser, for 3/4 through 1 1/2 H.P. (after 1988)
	SPX3000B	Diffuser, for 2 1/2 and 3 H.P. (1989 and prior)
	SPX3021B	Diffuser, for 2, 2 1/2 and 3 H.P. (after 1990)
7	SPX3005R	Impeller Ring – 3/4 through 2, 2 1/2 and 3 H.P. (SP3000 Series Impellers)
	SPX3021R	Impeller Ring – 2, 2 1/2 and 3 H.P. (SP3016C, SP3021C, 3026C)
8	SPX2607C	Impeller, for 3/4 H.P. 1987 and prior
	SPX2610C	Impeller, for 1 H.P. 1987 and prior
	SPX2615C	Impeller, for 1 1/2 H.P. 1987 and prior
	SPX3005C	Impeller, for 1/2 H.P. 1988-1989
	SPX3007C	Impeller, for 3/4 H.P. 1988-1989
	SPX3010C	Impeller, for 1 H.P. 1988-1989
	SPX3015C	Impeller, for 1 1/2 H.P. 1988-1989
	SPX3016C	Impeller, for 1 1/2 H.P. 1990 and later
	SPX3021C	Impeller, for 2 H.P. 1990 and later
	SPX3026C	Impeller, for 3 H.P. 1990 and later
9	SPX1600Z2	Seal Assembly PS-201
10	SPX3000E	Seal Plate, for SP2600 Series Impellers
	SPX3020E	Seal Plate, for SP3000 Series Impellers
11	SPX0125Z44	Motor Cap Screw (Set of 4)
12	SPX0125F	Slinger
13	SPX3000F	Motor Mounting Plate
14	SPX1600Z4	Housing Cap Screw
15	ST1052	C-Frame Threaded Shaft 0.5 HP Motor
	ST1072	C-Frame Threaded Shaft 0.75 HP Motor
	ST1102	C-Frame Threaded Shaft 1.0 HP Motor
	ST1152	C-Frame Threaded Shaft 1.5 HP Motor
	ST1202	C-Frame Threaded Shaft 2.0 HP Motor
	ST1302	C-Frame Threaded Shaft 3.0 HP Motor
16	SPX3000GA	Mounting Bracket with Adapter and 2 Cap Screws
17	SPX1600Z52	Mounting Foot Cap Screw (Set of 2)
	SPX3000SR	Riser Base
18	SPX1600V	1⁄4" Drain Plug (1991 and prior)
	SPX1700FG	1⁄4" Drain Plug with Gasket